Open navigation

Creating printers

Setting up printers for a group of Hubs

Setting up an individual printer on a Hub


Note: Support is no longer provided for this product. Please use Cloud Management as an alternative.

In the following we create two printers as examples. One is assigned to the Amsterdam group, the other to a single Hub in this group.


Setting up printers for a group of Hubs

  • In the navigation pane on the left, highlight the Group Settings menu item for the Amsterdam group and then select the Add Default Printer menu item in the upper right corner of the NoTouch Center.

Creating printers on ThinPrint Hubs using the NoTouch Center: creating a printer in a group

NoTouch Center: creating a printer in a group

  • Specify the name of the printer.

Creating printers on ThinPrint Hubs using the NoTouch Center: entering the printer name

NoTouch Center: entering the printer name

  • Select any but unique printer identification number (ID).
  • In the Host Name field, enter the network address of the printer  and optionally the name of the printer driver (which facilitates printer mapping with AutoConnect).
  • Click the Save & Announce button to immediately send the printer properties to the Hubs.
  • With a click on Save, the Hubs retrieve the printer themselves the next time the properties are loaded – usually every 60 minutes (see Announce interval above).

Creating printers on ThinPrint Hubs using the NoTouch Center: specifying the printer properties

NoTouch Center: specifying the printer properties

The printer of the Amsterdam group appears under Group Settings as well as for both members of this group. 

Creating printers on ThinPrint Hubs using the NoTouch Center: group printer appears on both devices

NoTouch Center: group printer appears on both devices


Setting up an individual printer on a Hub

  • To create an individual printer on a Hub, highlight the hub and select Add Printer at the top of the NoTouch Center.

Creating printers on ThinPrint Hubs using the NoTouch Center: creating an individual printer on a single Hub

NoTouch Center: creating an individual printer on a single Hub

  • Again, select any but unique printer identification number (ID).
  • In the Host Name field, enter the network address of the printer  and optionally the name of the printer driver (which facilitates printer mapping with AutoConnect).
  • Click the Save & Announce button to immediately send the printer properties to the Hubs.
  • With a click on Save, the Hubs retrieve the printer themselves the next time the properties are loaded – usually every 60 minutes (see Announce interval above).

Creating printers on ThinPrint Hubs using the NoTouch Center: individual printer created on a single Hub

NoTouch Center: individual printer created on a single Hub


Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.