Pull Printing and Personal Printing
Version information and firmware update
The following is an overview of the Hub's PowerShell commands.
- Click on the link of the respective command (cmdlet) to get detailed instructions.
Printers
| Cmdlet | Brief description |
| Get-TPHubPrinter | Retrieves the printer list from the ThinPrint Client |
| Add-TPHubPrinter | Creates a new printer on the ThinPrint Client |
| Set-TPHubPrinter | Modifies an existing printer in the ThinPrint Client |
| Get-TPHubAvailableUSB | Imports the printers connected to the USB interfaces of the Hub |
| Remove-TPHubPrinter | Removes a printer from the ThinPrint Client |
| Remove-TPHubAllPrinter | Removes all printers from the ThinPrint Client |
| Get-TPHubDefaultPrinter | Reads the default (or the current) printer of the ThinPrint Client |
| Set-TPHubDefaultPrinter | Sets the default (or the current) printer of the ThinPrint Client |
Finding Printers
| Cmdlet | Brief description |
| Set-TPHubFindPrintersSettings | Enables the search for printers in the local subnet of the hub and the automatic addition of found printers to the printer list |
| Get-TPHubFindPrintersSettings | Displays the settings whether to search for printers in the local subnet of the hub and whether these printers should be automatically added to the printer list |
| Get-TPHubFindPrinters | Searches for printers in the Hub’s local subnet |
| Set-TPHubDiscoveredPrinter | Enables searching printers in the Hub’s local subnet |
| Get-TPHubDiscoveredPrinter | Searches for printers in the Hub’s local subnet |
| Add-TPHubDiscoveredPrinterBlacklist | Marks printers as hidden |
| Remove-TPHubDiscoveredPrinterBlacklist | Removes the attribute hidden |
Printer Monitoring
| Cmdlet | Brief description |
| Get-TPHubSnmpGlobal | Reads the SNMP configuration with which the printers are addressed globally |
| Set-TPHubSnmpGlobal | Configures SNMP globally for all printers |
| Get-TPHubPrinterSnmp | Reads the SNMP configuration with which a specific printer is addressed |
| Set-TPHubPrinterSnmp | Configures SNMP for a specific printer |
| Get-TPHubPrinterSnmpStatus | Queries the SNMP status of a printer |
| Get-TPHubSnmpProxy | Checks whether the current ThinPrint Hub is acting as a proxy |
| Set-TPHubSnmpProxy | Set up ThinPrint Hub as a proxy through which the printers can be queried via SNMP |
Network
| Cmdlet | Brief description |
| Get-TPHubNetworkDesc | Reads the Hostname and the Comments and Location description fields (and also the software internal Revision hash, to uniquely identify the configuration) from the Hub |
| Set-TPHubNetworkDesc | Modifies the Hostname and the Comments and Location description fields of the Hub |
| Get-TPHubNetworkIPV4 | Reads the Ipv4 configuration from the Hub |
| Set-TPHubNetworkIPV4 | Modifies the Hub's IPv4 configuration |
| Get-TPHubNetworkIPV6 | Reads the Hub IPv6 configuration |
| Get-TPHubNetworkIEEE802.1X | Reads the configuration of the EAP network authentication for Ethernet |
| Set-TPHubNetworkIEEE802.1X | Sets the configuration for EAP network authentication for Ethernet |
Hub Monitoring
| Cmdlet | Brief description |
| Get-TPHubSnmpAgentV1 | checks if the current ThinPrint Hub can be monitored with SNMP version 1 or 2c |
| Set-TPHubSnmpAgentV1 | determines that the current ThinPrint Hub can be monitored with SNMP version 1 or 2c |
| Get-TPHubSnmpAgentV3 | checks whether the current ThinPrint Hub can be monitored with SNMP version 3 |
| Set-TPHubSnmpAgentV3 | determines that the current ThinPrint Hub can be monitored with SNMP version 3 |
Remote Management
| Cmdlet | Brief description |
| Get-TPHubEzeepCloudManagement | Checks the activation of the cloud management of ezeep Blue |
| Set-TPHubEzeepCloudManagement | Enables cloud management of ezeep Blue (prerequisite for Hub claiming) |
| Get-TPHubStrato | Reads the remote management settings for the use of Stratodesk NoTouch Center |
| Set-TPHubStrato | Modifies the remote management settings for the use of Stratodesk NoTouch Center |
| Get-TPHubStratoTestConnection | Tests the connection to the Stratodesk NoTouch Center. Corresponds to the Test Connection function in the web console. |
| Get-TPHubStratoSyncNow | Retrieves the Hub configuration from the Stratodesk NoTouch Center. Corresponds to the Synchronize Now function in the web console. |
Cloud Connect
| Cmdlet | Brief description |
| Connect-TPHubEzeep | Connects the Hub to ezeep Blue to allow printers installed on the Hub to also be used for cloud printing with ezeep Blue (in the Azure cloud). |
| Get-TPHubEzeep | Displays the properties of the connection made with Connect-TPHubEzeep to ezeep Blue (in the Azure cloud). |
| Add-TPHubClaimEzpHub | includes an ezeep Hub into the cloud management of ezeep Blue using its MAC address |
| Disconnect-TPHubEzeep | Disconnects the Hub from ezeep Blue (in the Azure cloud). |
ThinPrint
| Cmdlet | Brief description |
| Get-TPHubThinPrintConfig | Reads the ThinPrint Client configuration |
| Set-TPHubThinPrintConfig | Modifies the ThinPrint Client configuration |
| Get-TPHubThinPrintConSvcConfig | Reads the ThinPrint Client Connection Service configuration |
| Set-TPHubThinPrintConSvcConfig | Modifies the ThinPrint Client Connection Service configuration |
| Get-TPHubThinPrintConSvcConfigTest | Tests the connection to the ThinPrint Connection Service. Corresponds to the Test Connection function in the web console. |
Pull Printing and Personal Printing
| Cmdlet | Brief description |
| Get-TPHubPPConfiguration | Displays the Personal Printing settings of the current Hub or Release Station |
| Set-TPHubPPConfiguration | Sets specific Personal Printing properties of a Hub or Release Station |
| Get-TPHubPPServerCheck | Tests the connection to the Personal Printing server. Corresponds to the Test Connection function in the web console |
| Get-TPHubPPReader | Shows the current assignment of the card reader to the USB interface(s) |
| Set-TPHubPPReader | This cmdlet allows you to manually assign the card readers to the USB interfaces. Automatic recognition of the USB port assignment is only possible with the web console. |
| Get-TPHubPPLastId | Displays the identification number (ID) of the last card held to the card reader and the date and time of this event. |
| Get-TPHubPullPrintingConfiguration | Reads the Pull Printing configuration for ezeep Blue (in the Azure cloud) from the Hub or Release Station respectively |
| Set-TPHubPullPrintingConfiguration | Sets and configures pull printing for ezeep Blue (in the Azure cloud) |
Certificates
| Cmdlet | Brief description |
| Add-TPHubCertificate | Uploads a certificate onto the Hub |
| Unlock-TPHubCertificate | If a certificate (just) loaded, with Add-TPHubCertificate, is protected by a password, then unlock it with this Cmdlet. |
| Get-TPHubUnconfirmedCertificate | This function can be used to check whether a password-protected certificate has been successfully unlocked with Unlock-TPHubCertificate after uploading |
| Remove-TPHubUnconfirmedCertificate | This Cmdlet has the same function as the Remove . It can only be used following the uploading of a certificate whose password has still not been sent to the Hub with Unlock-TPHubCertificate. |
| Remove-TPHubCertificate | Removes certificates that are not currently assigned a function with Set-TPHubSslConfig |
| Get-TPHubCertificate | Displays all the certificates uploaded with Add-TPHubCertificate – regardless of whether they have already been assigned a function with Set-TPHubSslConfig |
| Get-TPHubSslConfig | Indicates what function has been assigned to which certificate uploaded with Add-TPHubCertificate |
| Set-TPHubSslConfig | Applies one of three functions to certificates uploaded with Add-TPHubCertificate |
System
Setup and security
| Cmdlet | Brief description |
| Find-TPHubDevices | Searches for Hubs in the local subnet |
| Set-TPHubTemporaryNetworkConfig | Changes the IP address of a Hub (valid only up to the next system reboot of the device). |
| Set-TPHubUri | Defines web address of the Hub to be configured |
| Get-TPHubUri | Shows the current web address of the Hub to be configured |
| Set-TPHubProxy | Defines a proxy server for web access to the Hub to be configured |
| Get-TPHubProxy | Displays the current proxy server address |
| Set-TPHubServerCertificateValidation | Determines whether or not the web console certificate will be accepted by the PowerShell module |
| Get-TPHubServerCertificateValidation | Imports the current setting for accepting the web console certificate through the PowerShell module |
| Get-TPHubLanguage | Reads the current system language |
| Set-TPHubLanguage | Changes the system language back |
| Set-TPHubPassword | Changes the system password |
| Get-TPHubIsHidden | Shows whether the function Make ThinPrint Hub invisible for the ThinPrint Hub Finder is enabled, i. e. whether the Hub will become invisible to the Finder after five minutes |
| Set-TPHubIsHidden | After five minutes after a system reboot, the Hub will no longer appear in the Hub Finder |
| Get-TPHubAuthentication | Logs the current user into the Hub |
| Clear-TPHubAuthentication | Logs the current user out from the Hub and deletes the tokens of an ezeep login from the Windows registry |
Restart, reset and backup
| Cmdlet | Brief description |
| Start-TPHubReboot | Reboots the system |
| Start-TPHubFactoryReset | Resets the Hub to its factory default settings |
| Get-TPHubRequestTimeout | Reads the timeout from the Hub |
| Set-TPHubRequestTimeout | Reads the timeout from the Hub |
| Export-TPHubBackup | Saves the settings in a .json file |
| Import-TPHubBackup | Reads the saved settings from the .json backup file and writes them into the Hub |
| Get-TPHubTaskResult | Used to determine if a save operation of a particular Cmdlet has already completed and was successful (Set-TPHubNetworkIPV4, Set-TPHubEzeepCloudManagement, Import-TPHubBackup). |
Version information and firmware update
| Cmdlet | Brief description |
| Get-TPHubVersions | Reads out the version information |
| Update-TPHubFirmware | Updates the firmware |
System time and logging
| Cmdlet | Brief description |
| Get-TPHubTime | Reads the Hub’s system time |
| Set-TPHubTime | Sets the system time if a time server is not specified and there is no internet connection |
| Get-TPHubTimeServer | Sends query to time server in the Hub |
| Set-TPHubTimeServer | Defines a time server |
| Export-TPHubLogFile | Saves the logs completely into a file |
| Get-TPHubLogVerbosity | Retrieves the ThinPrint Client log level |
| Set-TPHubLogVerbosity | Modifies the ThinPrint Client log level |
| Clear-TPHubLogFile | Removes all log files |
| Get-TPHubRemoteSyslogAddress | Reads the address of the syslog server |
| Set-TPHubRemoteSyslogAddress | Sets the address of the syslog server |