ThinPrint Engine • Getting Started
ThinPrint Engine Components
- High Availability and Load Balancing
- Printer Self Service
  - Using the Self Service
  - Windows Registry entries of ThinPrint Self Service
- ThinPrint Group Policies
- Connection Service aka Secure Tunnel
- ThinPrint Tracking
ThinPrint Clients
- ThinPrint Client Windows
- ThinPrint Client for VMware Horizon
- ThinPrint Client Mac
- ThinPrint Client Linux
- ThinPrint Client for HP Printers
ThinPrint Management Services
Personal Printing
- Personal Printing • Introduction
  - About Personal Printing
  - How it works
- Installing Personal Printing
- Configuring Personal Printing server
- Personal Printing Release Station
- User self registration & JobViewer
- Smartphone authentication
- Personal Printing clients on network printers
- Options and supplemental information
Licensing, Certificates and Diagnostics
- ThinPrint licensing
- License server
- License server's PowerShell module
- Enterprise Portal
- Creating and installing certificates
- Ports
  - TCP ports used by ThinPrint
- ThinPrint Diagnostic Utility
ThinPrint Hub
- Intended use and safety information
  - Intended use, conformities and Dual-Use Regulation
  - Safety information
- Quickstart with ThinPrint Hub
- Hub web console
- ThinPrint Hub Finder
- Updating the Hub
  - Downloading and installing a firmware update
  - Firmware versions
- Hub PowerShell module
- Hub cmdlets • Part 1
- Hub cmdlets • Part 2
- Hub cmdlets • Part 3
- Hub cmdlets • Part 4
- Managing certificates on the Hub
- Logging and reset
  - Hub logging
  - Factory reset
ThinPrint Hub Remote Management
- Cloud management
  - Managing Hubs in the cloud
  - Connecting printers to the cloud
- On-premises remote management (no support)
FAQs
Troubleshooting
- Printing issues
  - "Error While Opening Virtual Channel" When Printing
- Mapping issues
- Encryption and certificate issues
  - Troubleshooting – Encryption & Certificates
- Fonts and formatting issues
  - Solving font problems
  - Issues with Zebra and SATO Label Printer
- Management Services issues
  - Troubleshooting of Management Services
- ThinPrint Client issues
  - Troubleshooting of ThinPrint Client Mac
  - Troubleshooting of HP and Xerox printers
- ThinPrint Hub issues
  - ThinPrint Hub troubleshooting

Set-TPHubPullPrintingConfiguration

Description

Here you can configure Pull Printing of ezeep Blue. If the ThinPrint Hub (resp. the Personal Printing Release Station) is configured for ezeep Blue (in the Azure cloud), then it works exactly like an ezeep Hub (parameter PpType = 1).

Syntax

Set-TPHubPullPrintingConfiguration -Config [-Proxy ]

Parameter	Description
-Config	configuration specified by a variable
IsActive	Pull Printing disabled/enabled 0/1 = False/True
PpType	Pull Printing type 0/1 = ThinPrint/Ezeep
JobHandlingMode	print jobs one by one or print all or as long as the card is held to the card reader 0/1/2 = OneByOne/AllAtOnce/PrintWhilePresent
Password	password set for the Hub (or Release Station) in the ezeep Blue portal→ Network Printers→ Connectors
-Proxy	• optional (from firmware version 1.1): proxy server address • can also be specified globally using Set-TPHubProxy

Example

The following example reads the Pull Printing configuration from the Hub (or Release Station), enables Pull Printing, sets the print mode to print jobs one by one, and reloads the modified configuration.

Get-TPHubPullPrintingConfiguration 
$config = Get-TPHubPullPrintingConfiguration 
$config.IsActive = 1 
$config.JobHandlingMode = 0
Set-TPHubPullPrintingConfiguration -Config $config
Get-TPHubPullPrintingConfiguration

ThinPrint Hub's PowerShell cmdlet Set-TPHubPullPrintingConfiguration