Description
Modifies the ThinPrint Client Connection Service configuration (see ThinPrint)
Syntax
Set-TPHubThinPrintConSvcConfig -Config <variable> [-Proxy <string>]
| Parameter | Description |
| -IsActive | 1 = Connection Service enabled (displayed as True) 0 = Connection Service disabled (displayed as False) |
| -Address | the address of the server on which the Connection Service runs |
| -Port | TCP port, over which the ThinPrint Client connects with the Connection Service; default: 4001 |
| -ClientId | the device’s identification number, for logging on to the Connection Service |
| -AuthKey | authentication key for logging on to the Connection Service |
| -Config | Connection Service configuration defined through variable |
| -Proxy | • optional (from firmware version 1.1): proxy server address • can also be specified globally using Set-TPHubProxy |
Example 1
The following example sets the Connection Service values Client ID = 443 and Authentication Key = 43:
$a = Get-TPHubThinPrintConSvcConfig $a $c = 443 $d = 43 $a.ClientId = $c $a.AuthKey = $d Set-TPHubThinPrintConSvcConfig -Config $a or $a | Set-TPHubThinPrintConSvcConfig Get-TPHubThinPrintConSvcConfig
The result in the web console is displayed in the following screenshot.
Example 2
The following example disables the Connection Service option and then enables it directly. Here, the current state is monitored each with Get-TPHubThinPrintConSvcConfig.
$a = Get-TPHubThinPrintConSvcConfig $a $b = 0 $a.IsActive = $b Set-TPHubThinPrintConSvcConfig -Config $a $a = Get-TPHubThinPrintConSvcConfig $a $b = 1 $a.IsActive = $b Set-TPHubThinPrintConSvcConfig -Config $a $a = Get-TPHubThinPrintConSvcConfig $a
