Central remote management
Starting with firmware version 1.8 it is possible to remotely configure ThinPrint Hubs using the (on premises installed) Stratodesk NoTouch Center. On this, use Network→ Remote Management→ Central Remote Management in the ThinPrint Hub's or Personal Printing Release Station's web console.
|Central remote management|
manages the Hub centrally with Stratodesk NoTouch Center or ThinPrint Hub Remote Management
Note: If this feature is enabled, all other Hub console settings can be periodically overwritten by NoTouch Center settings.
|Server||address of the NoTouch Center or virtual appliances of the Stratodesk server (IP address, hostname or FQDN), default: |
|Sync interval (in min)||interval at which the ThinPrint Hub or Personal Printing Release Station obtains its settings from the NoTouch Center, default: 60 minutes|
|Synchronize now||obtains Hub settings from the Stratodesk NoTouch Center immediately|
|Test Connection||tests the connection to the Stratodesk NoTouch Center using the specified address|
|Save||saves your settings|
|Cancel||cancels the operation|
Using the NoTouch Center
The ThinPrint Hub Remote Management using the Stratodesk NoTouch Center (NTC) provides a web console for managing ThinPrint Hubs and Personal Printing Release Stations – hereinafter referred to as Hubs. For this purpose, we provide you with a pre-assembled VMware image with web console. You only have to import it into VMware vCenter, VMware Workstation or Oracle VirtualBox. By default, the Hubs with firmware version 1.8 or later automatically find the NotTouch Center in the local network if its hostname (tcmgr) is entered in the Domain Name System (DNS).
With the NoTouch Center installation you will receive a demo license for five devices, which is valid for an indefinite period. After you have tested the NoTouch Center, you can add additional purchased licenses.